Frequently bought together
Mars Pro II CreeLEDs256 LED grow light
led grow light glass
Mars Hydro Grow Tent 48''X48''X80'' 1680D
DetailsFull spectrum Mars Pro II Cree 256 for all seedling, growth, and flowering stage. Cree chips insure the most effective grow lights hydroponics in your grow room. Pro II Cree 256 can replace 1000 watts grow lights HPS/MH/HID.But cooler than normal leds. Perfect for 4x4 and 5x5 grow tent setup.
Item NO. MarsPro II Cree256 USA Coverage 4'x4'/per light 4'x8'/2pcs lights Max Yield 2.0g/watt Compare to HPS/MH/HID 1000W Draw power 110V: Veg : 340w±5% / Bloom: 664w±5%|220V: Veg: 330.7w±5% / Bloom: 647.7w±5% Hanging Distance Seedling stage: 24~30‘’ Veg Stage: 16~24‘’ Flowering Stage: 12~16‘’ Certificate ETL, CE, RoHS Spectrum Cree™ 440nm, 630nm，660nm, 2700k-3000k Chip Brand Cree Voltage AC85-265V Amps 5.7 @ 110v 2.8 @ 220v BTU 1883 Decibel Value 61.4DB Plug Type USA View Angle of LED 100° Humidity =<90% Lifespan 50K Hours Dimension 23 "x21" x 5" (57cm x 53cm x 12cm) Work Temperature -4°F ~105°F (-20°C ~ 40°C) N.W/G.W 16.5/17 Warehouse USA UPC Number 600740989056
- Spectrum/ Par
- Grow Tips
1.How do I determine the right light for my grow area?
Measure the floor space. Multiply the length times the width and this will give you the square footage. You should be able to get decent results with 30-50 actual watts of power per square foot.
2.For larger areas should I go with a single large panel or multiple medium to small lights?
Using multiple lights allows you to better distribute the intense light in more areas of the grow space instead of having all of the higher intensity light concentrated in only one area while the outer edges never receive intense light.
3.Recommended Hanging Distance Above Plants Seedling stage: 24~30‘’,Veg Stage: 16~24‘’,Flowering Stage: 12~16‘’
4.Here are more tips for grow under our light: Growth stage, turn Growth switch on. Bloom stage, turn Growth and Bloom switches on.
5.Recommended Lighting Time Veg: 18/6(on/off) or 20/4(on/off) Flower: 12/12(on/off)
6.Recommended Growing Conditions The rate of photosynthesis and transpiration are directly affected by temperature, humidity and airflow. The perfect temperature and humidity for your plants are found between 75°-85°F and 50% - 70% humidity, with plenty of airflow to replenish CO2. PH is 6-6.5. You may add more calcium and magnesium than normally needed.
7.Please Note The light is not water-proof, so do not use it under water environment. Light may be too strong, please wear your sunglasses when looking at it. Some leds seem dim. They are IR. Human eye can not see IR very clearly, but you can wear sunglasses to check.
- When will my order be shipped?
- Do you offer warranty on the light?
- Do you know the ETA when the light will be delivered after I place order online?
- Can I order some spare replacement parts when I order the light? If can, where should I order them?
- Are there any other items together with the light? such as powercord, cables and so on.
You may also be interested in the following product(s)
Add A Review
your email address will not be published . required fields are marked *