Mars Hydro Drip Irrigation Kit 5-Gallon Bucket Watering System
Regulate your indoor watering system with the Mars Hydro Drip Irrigation Kit! The hydronic kit includes a drip system (2 sizes of tubing and 8 water emitters), a pump (22W, 800L/H), and a bucket (5 gallons). Complete the installation of the drip irrigation bucket kit and you're all set for a convenient, pressure-regulated indoor watering system.
Bucket Watering Drip Irrigation Kit For Indoor Plants: The combination watering kit of the 5-gallon bucket and 8-irrigator drip kit includes everything you need to run a pressure-regulated plant watering system. Cut the tubing to the exact length you need, stake the drip emitters around your plants, and you're ready for year-round watering convenience. This drip watering kit is a perfect fit for indoor grow tent system.
5-Gallon Water Bucket & Visible Water Level: The 5-gallon bucket is made of corrosion-resistant polypropylene material and can hold a variety of nutrient solutions. Next to the bucket is a water level indicator tube with a red float positioned to show the water level inside the opaque bucket.
Powerful Water Pump With Strainer: The equipped pump consumes 22 watts and provides a maximum flow rate of 800 liters per hour. A strainer can be connected to the inlet of the pump to filter particles from the water and prevent clogging of the water pipes. An automatic drip irrigation system can be realized if paired with a timer or iHub smart power strip.
Controllable Water Valves and Drip Irrigators: The red water valve controls the total water volume, so it’s easy to control the water volume of eight (or four) sprinkler heads with a single valve. In addition, each drip irrigator can also control its own water output by turning its knob head.
Non-Harmful Materials and Standard Sizes: All tubes and fittings in this drip watering kit are made of polypropylene and PVC, which are harmless to plants and humans. Sizes are standard, so if you need to do some DIY work, it's easy to find alternatives on the market. The larger tubing is ½" irrigation tubing with an 8mm ID and 12mm OD; the smaller tubing is ¼" irrigation tubing with a 4mm ID and 6mm OD. All connectors, plugs, and valves are compatible with the market standard 1/2 inch tubing. (ID: Inner Diameter; OD: Outer Diameter)