Mars Hydro FC-E4800 BridgeLux 480W Smart Grow System LED Grow Light
FC-E4800 Grow Tent Kits
|Quantity||Bulk % discount|
NEW upgraded FC-E4800 is densely packed with snap-in design, BridgeLux chips, giving an average PPFD of 1000umol/m²/s, suitable for personal and commercial veg rooms. Full-spectrum meet the plant growth needs.
- Wattage - 480w
- Personal Cultivation Coverage - 4x4 ft
- Commercial Cultivation Coverage - 3x3 ft
For Indoor Horticulture growers, from professional cultivators to hobbyists.
Upgraded Installation Method:New snap-in design supports growers to install and remove the light bars easier.
Smart Grow System:A smart LED grow light that supports mobile control and scheduling via the Mars Hydro app. More integrated intelligent products should be included soon.
Professional LED Performance:The Mars Hydro FC-E4800 intelligent grow light is a 480 watt LED grow light that offers an efficiency of 2.8 µmol/j and a photon flux of 1331 µmol/s. It features a full-spectrum white light that is best for plants from seedling to harvest.The light bars will disconnect and the power will be cut off. The Smart FC-E 4800 is designed for tent growers and commercial vegetative growth.
Remote control and OTA data transmission:Mobile access to LED lighting in the Mars Hydro App via WiFi. All data and settings are stored and transmitted via OTA technology. Easily control your grow lights and plan your grow plans with a tap of your mobile screen, anywhere, anytime.
Precise Setup & Auto Dimming:Light intensity can be precisely adjusted by year/month/day/hour/minute for dynamic light levels to fit your growing schedules. Shading schedules run automatically when set up to ensure full growth from seed to harvest. [Three predefined growth schedules have been prepared in advance for your review.] It provides the ability to simulate sunrise and sunset to mimic plants' natural photoperiod by evenly dividing the scheduled time into 12 segments that represent thelight levels going from 0 to 100% for the first 6 hour segments and from 100% to 0 for the last 6 hour segments.
Independent control of several lights at the same time:switching and dimming of several lights of the FC-E 4800 system (up to 100) without additional cables.Even in separate rooms or tents, the app can split the LED lighting into different lighting groups to allow independent management and facilitate monitoring and planning of different crops in progress without disturbing each other's plans.
Watch the Tutorial Video On the Smart LED Grow Lights.
|Spectrum||660-665nm 2800-3000K 4800-5000K|
|Amps||[email protected] [email protected] [email protected]|
Write Your Own Review
Ask a Question
Hi, it has not the IR and UV
If you buy now, the latest FC-E4800 light is already with wifi&bluetooth dimming box, so you don't need buy a separate iHub smart power strip. But if the one you own is with old version and you wanna control it on your phone, yes, you need buy that iHub smart power strip.
I have one fc-e 4800 from 2021. If I add one of the new smart grow fc-e4800 can I use it to control both? Or I have to upgrade the the new smart grow
Yes, you could control both of them through APP. Just connect the them through wire then set the smart LED as the master LED.
Follow these steps to establish a Bluetooth connection: 1.Make sure Bluetooth is enabled on your smartphone/tablet and that you are within a 10-meter range of the product to avoid weak signal issues. 2.Try resetting the device and reconnecting it. Refer to this guide for instructions: [https://youtu.be/nLCp___nduY] 3.Attempt to connect using another electronic device (smartphone/tablet). 4.If your phone's Bluetooth can detect the device but the app scanning feature cannot find it, check if your mobile device supports the BLE (Bluetooth Low Energy) protocol. Only Bluetooth devices that support BLE can successfully scan and connect. 5.If the issue persists or if you are unsure about your phone/tablet's BLE support, please send the model of your device, the APP registration email (user ID), and a complete screen recording of the Bluetooth connection process to Mars Hydro for verification and... Read more
Verify that the Time Zone is set correctly. For more information, refer to the "Time Zone Problem" section. Once the device is connected to the app, it is recommended to avoid manual operations, as manual operations (adc mode) will override the app commands (cmd mode). If the setting command fails to be delivered successfully, it is advised to reconfigure and deliver the command (configured settings) once again.
There are two types of upgrades on the Mars Hydro App: 1. Proactive Upgrade: Ensure that the device is connected to WiFi. Access "Me→Equipment Settings→Equipment Update". Refer to this video tutorial for detailed instructions: [https://youtu.be/EQHmQvPeBIA]. 2.Mandatory Upgrade: During the initial connection of the device to your WiFi, the app will automatically initiate a mandatory upgrade for your device. After entering your WiFi account and password, the app will switch back to the device scanning interface and begin the OTA mandatory upgrade process. The upgrade typically takes 2-3 minutes. After completion, please reconnect your device to... Read more
We found other products you might like!